- How are back tab curtains measured?
- Do curtains need to touch the floor?
- What size curtains do I need for a 72 inch window?
- How do curtain sizes work?
- How many panels of curtains do I need?
- What kind of curtains use hooks?
- How wide should curtains be for 60 inch window?
- What is a back tab curtain?
- How do I keep my curtains back?
- Can you hang back tab curtains with hooks?
- What is the correct width for curtains?
- What is length and width of a curtain?
- What do back tab curtains look like?
- How do I stop the lights on the side of my curtains?
How are back tab curtains measured?
You will need to measure from the top of your curtain rod, down to where you would like the panel to end.
If you are using a thick diameter pole, you may want to add 1” for take up (the amount the pole will cause the curtain to inch up at the bottom)..
Do curtains need to touch the floor?
So should curtains touch the floor? The short answer is yes… usually. But when making any decision about your window treatments, whether they’re drapes, blinds, or shades, it’s important to consider every aspect of style and function so you can choose the best option for your windows and your home.
What size curtains do I need for a 72 inch window?
To get the measurements, measure the width of the rod from left to right. For instance, if your window measures 72” wide, you will need curtains that will give a maximum width of 144” (window width x 2 = 144”.)
How do curtain sizes work?
Ready-made curtains are available in three standard widths: 112 cm (44 inches), 167 cm (66 inches) or 228 cm (90 inches). … The width measurement actually refers to the width of each curtain in the pair, as you need double the width of your track or pole in curtaining for the gathered effect.
How many panels of curtains do I need?
Divide your total by the width of a single curtain panel to get the number of panels you need. ~ Multiply window width by 2.5 to 3 if you want curtains tightly gathered for a full, luxurious look. Divide your total by the width of a single curtain panel to get the number of panels you need.
What kind of curtains use hooks?
Pin-on hooks are used to hang pinch-pleated draperies from a traverse rod or from tabbed rings on a decorative round rod. There are several types: Round pin-on hooks have a rounded top that slides on a cafe or sash rod, allowing pinch-pleated curtains to be used without the standard traverse or rod and rings hardware.
How wide should curtains be for 60 inch window?
Example: For a 60-inch window with two curtain panels, add 24 inches to 60 inches (window width) and divide by 2 (number of panels) to get 42 inches. The two panels ordered each need to be at least 42 inches wide.
What is a back tab curtain?
Back tab curtains have hidden strips of fabric tabs sewn on the back of the curtains. You can either slide these loops directly onto the curtain rod, or attach rings with clips to the loops. … Back tab curtains work well if you don’t want to display the curtain rod.
How do I keep my curtains back?
Stick one side of a self-adhesive hook and loop tape dot on the back of a metal rod at the position of each inside edge when in the desired gathered position on stationary panels. Stick the other side of the dot to the inside of the rod pocket of the back side of the drape or the inside of the curtain ring.
Can you hang back tab curtains with hooks?
Many drapes come with back tabs where you can clip the rings, or you can pinch the fabric to create pleats. … When using drapery hooks, you have to make sure the hook does not go through to the front of the drape. You only want it to grab the back tab or lining.
What is the correct width for curtains?
Curtain widths should typically be about 1 1/2 to 3 times the final width measurement of your window. However, the fullness you choose will ultimately define the style you want to achieve. Fuller curtains lend a richer feel to your windows while curtains with a shorter width create a more tailored look.
What is length and width of a curtain?
Curtain measurements are always written with the width first and then the length. For example, a panel that is 46″ x 54″ is 46 inches wide and 54 inches long. Don’t buy your curtains just so they’re big enough to cover a window.
What do back tab curtains look like?
Back tab curtains, also called hidden tab curtains, have tabs or loops sewn onto the back of the curtain header. The rod slips through the tab so that neither is visible from the front. This gives the illusion of the curtain floating in space and creates an elegant, clean line.
How do I stop the lights on the side of my curtains?
You can apply a magnetic tape on their sides and on the sides of the window, apply a weather-strip, caulk your windows, or add a valance. The latter is one of the most effective ways for blocking light and beautifying your window space.