Quick Answer: Does It Matter Which Slot I Put My Ram In?

Where do I put the ram in 4 slots?

In the case of a motherboard with four RAM slots, it’s probable you’ll want to install your first RAM stick into the slot labeled 1.

A second stick should go into Slot 2, which isn’t next to Slot 1.

If you have a third stick, it would go into Slot 3, which will actually be between Slot 1 and Slot 2..

Can I install 3 sticks of RAM?

To answer your question yes you can use three sticks of ram, however you will not get the maximum performance from it like you will from matched pairs in dual channel. For stability & performance, never mix sets and always configure in dual channel mode.

Do both RAM slots need to be filled?

If it is DDR2 or DDR3 with 4 DIMM slots, then it will be a dual channel configuration, in which there will be no performance difference between having two slots filled vs all four filled, if only two are filled, it is the matter of if the motherboard supports the RAM sticks and the correct slots to fit them into.

Can I put my ram in any slot?

A common misconception about RAM is that you can put any RAM into any slot. You can do that, but it won’t work, or it will work ineffectively. If you have four RAM slots, always buy matched pairs of RAM (two sticks from the same company, same speed, and same capacity) for the best results.

What happens if you put RAM in wrong slots?

If ram is in the wrong slot then it wont boot. If you have two sticks of ram and two slots there is no such thing as a “wrong slot”. … If the ram in slot 1 is bad and you use integrated graphics then this will cause even more issues because the first portion of stick 1 is used for video memory.

Can I use 8gb RAM in one slot instead of 2x4GB RAM?

It works in pairs. A single 8 gig stick in any slot will give you 8 gig in single channel. it will work, but in single channel mode, you will get less out of it than you would with 2×4 gig sticks. Its safe, the computer will run, but it will have half the bandwidth of a 2x4GB setup.

Is it OK to use all 4 RAM slots?

it can work but the safest and most stable RAM setup is to have all 8GB or all 4GB to fill up the slots. also having the same RAM brand and speed helps to make it stable. having the 4 8 4 8 RAM setup will probably work but not recommended by RAM manufacturers or motherboard manufacturers.

Is it better to have 2x4GB or 1x8GB RAM?

Dual channel is slightly faster, so 2x4GB would be the better choice. However, if you ever plan on upgrading your ram in the future I would suggest the 1x8GB stick. Then get another 1x8GB stick when you upgrade.

Is it better to have 1 16gb or 2 8gb?

If you have 2 slots, a single 16gb is better,since you can upgrade in the future easier. If you have 4 slots or you don’t plan to ever upgrade, 2x8gb is better since that is faster and will increase the performance of your pc.

Can you use two different brands of RAM?

Your computer is likely to run fine if you mix different RAM brands, different RAM speeds, and different RAM sizes. However, if you are going to buy a new RAM stick, it would benefit you to just buy something that is compatible. … So at the end of the day, yes you can mix RAM brands as long as you are careful.

Can I add 8gb RAM to 4gb laptop?

If you want to add more RAM than that, say, by adding an 8GB module to your 4GB module, it’ll work but the performance of a portion of the 8GB module will be lower. In the end that extra RAM probably won’t be enough to matter (which you can read more about below.)